Imagine a perfect automatic coffee machine in a café – it is our "system", pressing the button is the input, and the drink in the cup is the output. A memoryless machine makes the coffee only according to the button you pressed right now, with no connection at all to what the previous customer ordered; it is causal because it will never pour coffee before you have actually pressed the button; and it is invertible if it is enough to look at the finished cup to know for sure which button was pressed. The machine is stable if a reasonable press produces a reasonable amount of coffee (and does not flood the café), time-invariant if the same button produces exactly the same espresso both at eight in the morning and at five in the evening, and linear if a double order gives exactly double the coffee, and ordering an espresso + milk together gives exactly the sum of the two separately.
In signal and system analysis, we model a system as an operator \(T\) that turns an input signal \(x(t)\) into an output signal \(y(t) = T\{x(t)\}\). To know which mathematical tools we are allowed to apply to the system, we classify it according to six basic properties (which hold equally in discrete time \(n\)):
The last two properties – linearity and time-invariance – are the most important in the course, since a system that satisfies both is an LTI system, in which every output can be computed using convolution alone.
The left graph (on mobile: the top one), in glowing cyan. In every test it shows the inputs being tested.
In the middle, with the formula of the selected system. Points of light flow from the input into the box and from the box to the output.
The right graph (on mobile: the bottom one), in orange-gold.
At the top of the display: green = the property holds, red = it fails. Clicking a lamp turns the workbench into its stress test, and the active lamp is highlighted with a frame.
A purple vertical marker of \(t_0\) on both graphs, which you can drag. Threads of light stretch from \(y(t_0)\) to the points in \(x\) that affect it: white = present, light blue = past, red = future. A \(-\infty\) arrow marks a dependence on the whole past.
Left of the marker a soft "past and present" fill, right of it diagonal "future" stripes. "Launch a step pulse" runs a step that arrives at \(t_0\), and the dashed gray line is the output without the step. An early response paints the zone red with "Peeking into the future!".
Dashed lines \(\pm M_x\) on the input and \(\pm M_y\) on the output. The time axis expands and the camera zooms out: the walls are green while the output is caged, and red when it breaks through ("Diverges to infinity").
Track A in cyan: shift and then the system, \(T\{x(t-t_0)\}\). Track B in magenta: the system and then shift, \(y(t-t_0)\). Welded = one white line; separated = a red gap between them.
At the input \(x_1\) (cyan), \(x_2\) (magenta) and the combination \(a\,x_1+b\,x_2\) (white). At the output \(T\{a\,x_1+b\,x_2\}\) in cyan versus \(a\,T\{x_1\}+b\,T\{x_2\}\) in magenta.
Two different inputs, \(x_1\) and \(x_2\). If the outputs merge into one white line: "Collision! Information lost". For an invertible system, "Connect inverse system \(T^{-1}\)" adds a green box and a reconstruction graph \(\hat{x}\).
"Exam traps": \(2x\), \(x+1\), \(x(2t)\), \(x^2\), \(t\cdot x\); and systems with memory: integrator, moving average and the advance \(x(t+1)\). Choosing a system lights up all 6 lamps at once.
When the active lamp is red: sets the controls and the input signal to the edge case that breaks the property, with one explanatory sentence below the graphs.
Switches between continuous curves and stem plots ("lollipops", Stem plot) over \(n\) from \(-8\) to \(8\). The lamps are set for each mode separately.
A step, a pulse or a sine (all bounded). The speed slider and the pause button control only the pace of the animations: the step launch, the zoom and the reconstruction.
The system, the mode and the lamps, and for each test its own values: what \(y(t_0)\) depends on, the response time, \(M_x\) and \(\max|y|\), the gap between the tracks, and the reconstruction error.