LIMA
With God's help
עברית

Center of Mass

Imagine a chef tossing a wide pizza dough into the air to stretch it. While the dough is flying, its edges spin, flap and change shape in a chaos of internal motion. But if we follow one imaginary point right at the center of it all, we discover that it moves along a smooth, perfect parabolic path, as if we had thrown a single ball into the air and not a complex sheet. This special point is the "center of mass", and it lets us treat a whole, complicated system as if all of its mass were concentrated at a single point that responds to the external forces.

The theory in brief

Physically, the center of mass is the weighted average of the positions of all the particles in the system, where the "weight" assigned to each particle is its mass. For a discrete system of particles, the position vector is calculated by the equation \[\vec{R}_{cm} = \frac{\sum m_i \vec{r}_i}{M}\] (where \(M\) is the total mass). For a continuous body, the sum becomes an integral over all the mass elements that make up the body: \[\vec{R}_{cm} = \frac{1}{M}\int \vec{r}\,dm,\] and we usually use the mass density function to solve it.

A particularly useful property of the center of mass is that it can be calculated for a composite system by combining the centers, that is, by treating each sub-body as if it were a point mass located at its own center of mass: \[\vec{R}_{cm} = \frac{\sum M_i \vec{R}_{cm,i}}{\sum M_i}.\] The deepest dynamic meaning of the concept is expressed in Newton's second law for a system of many particles: \[\sum \vec{F}_{ext} = M\vec{a}_{cm}.\] This equation proves that only external forces acting on the system can accelerate the center of mass, while internal forces acting between the particles always cancel each other out, leaving the overall path of the center of mass completely unchanged.

center of mass edge of the body

How to read the lab

Mass ball

In "Build a discrete system" mode, clicking on the screen places a ball. Its size and color density grow with its mass. Drag a ball to move it.

Gold "target" marker (Crosshair): CM

The center of mass of the system. It appears once there is more than one ball, and moves smoothly when you drag a ball or change a mass.

Guide lines (lasers)

They connect the gold marker to each mass. A thicker line belongs to a larger mass: its relative "weight" in the average.

Floating slider

Appears next to the selected ball and changes its mass in real time. The same slider is also in the control column.

Shape and blue center

In "Continuous and composite bodies" mode you drag to draw a rectangle, a circle or a free shape. The blue marker is the shape's own center of mass, and the number next to it is its mass.

Material density

A brighter color = denser (kg/m²). The non-uniformity slider creates a density gradient across the shape: a non-homogeneous material.

Gluing and geometric center

Shapes that touch each other are "glued" into one body. The gold marker is the overall center of mass, and the white ring is the geometric center of the body (as if the density were uniform).

Formula window

The weighted average with the numbers of this moment. In dynamics mode it shows \(\sum \vec{F}_{ext} = M\vec{a}_{cm}\) with the forces and the acceleration.

Gold trail and red trail

Gold is the path of the center of mass. Red is the path of a single ball: the edge of the body.

The original path (dashed)

The parabola the center of mass would follow if only gravity acted on it from the moment of the throw. The "deviation from the original path" reading is the distance of the center of mass from it.

External forces

The orange arrow starts at the center of mass and shows the sum of the external forces: gravity, wind and magnet. Flowing blue streaks = wind.

Explosion, spring and magnet

The explosion gives every pair of balls an equal and opposite push. The spring pulls and pushes between two balls. You drag the magnet on the screen, and it pulls every ball from outside.

Throw, speed and pause

Throw with the button, or by dragging back from the body as with a slingshot. The speed slider only slows down the display, and ⏸ freezes time.

To the lab ↓
Loading the lab...
1

Experiments to try in the lab

  1. A tug of war of masses (the discrete basis). Place a small mass ball on the screen (for example, 2 kg) and a large mass ball (for example, 6 kg). Now, grab the mass slider of the small ball and increase it gradually until it reaches 24 kg. Follow the motion of the gold marker that represents the center of mass.
    The experiment illustrates the physical essence of the "weighted average". The center of mass is in fact the dynamic balance point of the system. As one mass grows, it increases its influence (its "weight" in the equation) and "pulls" the center of mass toward itself. The relative position of the gold marker reflects, at every moment, exactly the ratio of the masses of the particles.
  2. Assembling Frankenstein (the continuous and composite basis). Draw a huge rectangle and give it a low density (very light). Now, draw a small circle, give it the maximum density (very heavy), and "glue" it to one of the corners of the rectangle. Watch where the center of mass of the new shape jumps to.
    Here we see the practical power of the superposition principle. Instead of calculating a complicated integral over the entire composite, asymmetric shape that was created, the system uses the fact that each sub-shape can be treated as if it were a point particle located at its own center of mass. The small, dense circle outweighs the large but sparse rectangle in the equation, and drags the overall center of mass far away from the geometric center.
  3. Planned chaos (internal versus external forces). Under the influence of gravity, throw a group of bound balls into the air, watch the parabolic gold path that forms, and at the highest point press the "Apply internal force (explosion)" button.
    This is the magic moment of Newton's second law for systems. The explosion is an internal force – according to Newton's third law, every force that pushes one particle to the right is accompanied by an equal and opposite force that pushes another particle to the left. The vector sum of all the internal forces is exactly zero. Since the external force of gravity remains unchanged, the acceleration of the center of mass does not change, and the gold path continues along its perfect parabolic path, completely indifferent to the chaos happening around it.
  4. External disturbance (the influence of the surroundings). Reproduce exactly the throw of the group of balls from the previous experiment (the same angle and the same speed), but this time do not trigger an explosion. Instead, while the system is in the air, use the interface to apply a strong horizontal "wind" gust for 1.5 seconds.
    Unlike the internal explosion in the previous experiment, the wind is an external force applied to the particles of the system from outside. At this moment, the equation \(\sum \vec{F}_{ext} = M \vec{a}_{cm}\) is violated: the sum of the external forces has changed, and so the acceleration of the center of mass must change accordingly. The result is that the gold path "breaks" and deviates from its original path, which proves conclusively that the center of mass responds only to interactions with surroundings that are external to the system.
  5. The spring dance in space (conservation of momentum). Turn gravity off completely in the simulation ("Space mode"). Connect two balls with different masses by a spring, and give one of them an initial push that combines forward motion together with rotation. Let them float, spin and squeeze across the screen.
    With no gravity and no friction, from the moment the initial push ends, the sum of the external forces acting on the system is zero. As a result, the total momentum of the system is conserved. Even though the balls themselves perform a chaotic dance, moving apart and closer under the internal spring force, the gold marker of the center of mass will cross the screen in a perfectly straight line and at a constant speed. This is the purest visual illustration of the fact that when \(\sum \vec{F}_{ext} = 0\), the velocity of the center of mass \((V_{cm})\) remains constant.